Mortice Sash Lock – A Complete Guide
Many homeowners choose to use mortice sash locks because of the security they provide. Mortice sash locks consist of an internal bolt that slides in and out of a cylindrical hole found in a rectangular plate on the door frame and thus provides an effective barrier against intruders. The lock body is the component that actually connects to the door itself and it is usually hidden behind an attractive faceplate. The box keep is a piece of furniture designed to house the lock body and contains some very important components:
The key cylinder, which is located at the top-rear part of the box keep, consists of a rod through which you insert your key and turn it clockwise to open or anti-clockwise to close the lock. It is this component that allows you to control access to your home. The latch bolt which lies directly below the key cylinder extends from one side of the box keep across to another when turned clockwise by means of another rod on which it slides back and forth when activated by turning one end by means of a key. The bolt can be retracted again by turning its other end with a key. This mechanism is what provides security for your home as its main purpose is to prevent intruders from breaking into your property through any point along its perimeter.
A mortice sash lock is a lock that is operated with a key. The lock has a hole, or a slot, that is made specifically for the key. This hole is called a “mortise,” hence the name “mortice lock.” There are two main types of mortice locks: sashlocks and deadlocks. Each operates differently.
A sash lock includes both a latch and bolt, all of which are operated using some sort of key. A sash lock is considered to be a back door type of lock. A deadlock has only the bolt, which must be opened by some sort of key to allow the door to open. The deadlock is considered to be more appropriate for front doors.
How to Choose Mortice Sash Lock
Choosing between a mortice deadlock and sash lock really comes down to what kind of house you live in and what kind of doors you have in your house. If you have an older home with only back doors, then you might want to choose the sash lock because it will fit those doors better than the deadlock would. If you have newer doors in your home, then the choice becomes simpler: if you have a front door that leads outside, choose the deadlock; if not, then choose the sash lock.
When you’re faced with the task of buying a mortice lock, it’s important to know what size you need. If you want to make sure the lock is the right fit for your door, there are a few measurements you’ll need to take. First, take a measurement from the edge of your door to the centre of the keyhole. This will tell you how far from the edge of the door your keyhole will be placed. The second measurement is from the edge of your door to the centre of your lock. This measurement will tell you how far from the edge of your door to place the mortice lock itself.
In addition to these measurements, it’s also important to know about other details about your doors and frames that could affect whether or not a mortice lock will fit properly. Measurements such as case width and height, forend length and width, and inner and outer jamb lengths can all be used in determining if a mortice lock will work with your existing frame.
It’s worth noting that when you’re measuring a mortice lock, it’s best to measure twice and cut once. Even if two different measures seem like they’ll match up perfectly, it never hurts to double check before making any adjustments or cuts. A mortice lock has several dimensions that you will need to take into account when it comes to your door. These dimensions can seem difficult to figure out, but the trick is to understand how each measurement is taken. Once you do that, you will be able to easily take the measurement needed for your mortice lock.
The first thing you will need to determine is what kind of backset your door has. The backset is measured from the centre of the keyhole of the lock to the forend of the mortice lock. If you are using a sashlock, you will also need to take into account how far from the centre of the handle spindle is from the middle of the keyhole and measure for centres. Secondly, use a measuring tape or ruler and measure from one edge of where the case and forend meet (what’s known as centres) to where the other side meets it. This is your case width.
Thirdly, measure vertically from the top left corner (where the case meets with the forend) to the bottom left corner (where they meet with each other). This gives you your case height.
A mortice lock is a type of locking system.
Its main characteristic is that it requires a key to be turned in the lock to open the door. Many people use this type of lock because they want an extra layer of security. Mortice locks are popularly used in bathrooms, backdoors and rooms. There are many places where you can install a mortice lock if you’re looking for extra security, but some are better than others.
When it comes to choosing where you should put your mortice lock, the possibilities are endless! It all depends on what you’re looking for and what level of security you need. Whatever option you choose, installing a mortice lock can be an excellent way to keep your home safe while adding extra style to your door.
Htamba is a leading mortice sash lock supplier in the UAE. We have a team of experienced sash window experts who provide professional assistance and consultation on your project. To meet different requirements of customers, we keep modern designs and update products according to international standards